Contact Us Video why choose us
Home > News > Content
Hobbing Process
Jul 03, 2018

Hobbing uses a hobbing machine with two skew spindles, one mounted with a blank workpiece and the other with the hob. The angle between the hob's spindle (axis) and the workpiece's spindle varies, depending on the type of product being produced. For example, if a spur gear is being produced, then the hob is angled equal to the helix angle of the hob; if a helical gear is being produced then the angle must be increased by the same amount as the helix angle of the helical gear.The two shafts are rotated at a proportional ratio, which determines the number of teeth on the blank; for example, for a single-threaded hob if the gear ratio is 40:1 the hob rotates 40 times to each turn of the blank, which produces 40 teeth in the blank. If the hob has multiple threads the speed ratio must be multiplied by the number of threads on the hob.The hob is then fed up into the workpiece until the correct tooth depth is obtained. Finally the hob is fed through the workpiece parallel to the blank's axis of rotation.

Often multiple blanks are stacked, then cut in one operation.

For very large gears the blank can be gashed to the rough shape first to make hobbing easier.


Main Products
CNC Single Column Ver...
CNC Double Column Ver...
CONTACT US
Tel: +86-24-28205745
Name: Mr. Wayne
Ph: +8613840387827
E-mail: info@haitongcnc.com